CYLINDER CONFIGURATOR
Tie rods hydraulic cylinders in compliance with ISO 6020/2 Standard.Operating pression up to 160 bar.Bore from 25 mm to 200 mm.
Hydraulic servocylinders with tie rods in compliance with ISO 6020/2 standard, equipped with position transducer.Operating pressure up to 160 bar.Bore from 40 to 200 mm.
Tie rods hydraulic cylinders in compliance with ISO 6020/2 standard, equipped with external magnetic switches for the detection of the piston.Operating pressure up to 160 bar.Bore from 25 to 125 mm.
Hydraulic cylinders with counterflanges in compliance with ISO 6020/2 standard.They are suitable for strokes longer than 2000 mm.Operating pressure up to 210 bar.Bore from 50 to 200 mm.
Hydraulic servocylinders with counterflanges in compliance with ISO 6020/2 standard, equipped with position transducer.Operating pressure up to 210 bar.Bore from 50 to 200 mm.
Rotary actuators for torques from 6 to 120 daNm, rotations between 90° and 270°, moved by a hydraulic cylinder and a rack.They are equipped with adjustable cushioning and stroke end adjuster.
Hydraulic cylinders for heavy duty applications in compliance with ISO 6022 standard, with bronze guides for the piston and the rod for high performances and for a long life.Operating pressure up to 250 bar.Bore from 50 to 200 mm.
Hydraulic servocylinders for heavy duty applications in compliance with the ISO 6022 standard, equipped with position transducer, with bronze guides for the piston and the rod for high performances and a for a long life.Operating pressure up to 250 bar. Bore from 50 to 200 mm.
Rotary actuators with magnetic switches, for torques from 6 to 120 daNm, rotations between 90° and 270°, moved by an hydraulic cylinder and a rack.They are equipped with adjustable cushioning and stroke end adjuster.
Double acting light compact hydraulic cylinders made of high resistance aluminium with wear-resistant coating.Operating pressure up to 160 bar.Bore from 25 to 100 mm.
Double acting hydraulic cylinders made of steel for heavy duty applications.Operating pressure up to 250 bar.Bore from 25 to 100 mm.
Terminals with ball joint or fork with pin.
Male or hammer head terminals.
Slant hinge holders, straight hinge or pair of pin holders.
The magnetic tie rods cylinders ISO6020/2 MD and the compact one MP need their magnetic switches to perform at their best.
In order not to waste time and oil, we have all the spare seals for your cylinders.
If you wish to make your own ISO 6020/2 cylinder, your KIT is ready, made up of components of guaranteed Conforti quality.
ISO 6022:your KIT is ready, made up of components of Conforti guaranteed quality.
Burnished tubes, stainless steel tubes, chromeplated rods, stainless steel rods or hardened rods... everything available to be supplied to our customers even cut to measure.
Italiano
Deutsch
English
Français