Italiano
Deutsch
English
FrançaisISO 6020/2 and ISO 6022 hydraulic servo cylinders
with position transducer
ISO 6020/2 and ISO 6022 hydraulic servo cylinders feature a transducer that detects the absolute rod position at all times.
All cylinders are tested before delivery to ISO 10100 standard.
| Standard | ISO 6020/2 - ISO 6022 |
| BORES | From 40 to 200 mm |
| OPERATING PRESSURE | Operating: 160 bar Test: 240 bar |
| MAGNETOSCRICTIVE TRANSDUCER | |
| ANALOG OUTPUT | 0-10 V |
| 4-20 mA | |
| DIGITAL OUTPUT | 160 bar / 250 bar |
| 160 bar / 250 bar | |
| ISO 6020/2 with tie rods | |
| THREADED HOLES | Front ISO MX5 Rear ISO MX6 |
| FLANGE | Front ISO ME5 Rear ISO ME6 |
| FEET | Front and rear ISO MS2 |
| CLEVIS | Ball jointed eye ISO MP5 Male clevis ISO MP3 Female clevis ISO MP1 |
| TRUNNIONS | Front ISO MT1 Intermediate ISO MT4 Rear ISO MT2 |
| EXTENDED TIE-RODS | Front and rear ISO MX1 Front ISO MX3 Rear ISO MX2 |
| ISO 6020/2 with counterflanges | |
| THREADED HOLES | Front ISO MX5 Rear ISO MX6 |
| FLANGE | Front ISO ME5 Rear ISO ME6 |
| FEET | Front and rear ISO MS2 |
| CLEVIS | Ball jointed eye ISO MP5 Male clevis ISO MP3 Female clevis ISO MP1 |
| TRUNNIONS | Front ISO MT1 Rear ISO MT2 |
| ISO 6022 | |
| FLANGE | Front ISO MF3 Rear ISO MF4 |
| FEET | Front and rear ISO MS2 |
| REMOVABLE CLEVIS | Ball jointed eye ISO MP6 Male clevis ISO MP4 |
| EXTENDED WELDED CLEVIS | Ball jointed eye ISO MP5 Male clevis ISO MP3 |
| TRUNNIONS | Intermediate ISO MT4 |
| HIGH SEALING | Max. speed: 0.5 m/s Temperature: -20 / +80 °C Fluid: hydraulic oil |
| LOW FRICTION | Max. speed: 1 m/s Temperature: -20 / +80 °C Fluid: hydraulic oil |
| VITON | Max. speed: 1 m/s Temperature: -20 / +150 °C Fluid: hydraulic oil / Phosphoric esters |
| HFC-FLUID | Max. speed: 1 m/s Temperature: -20 / +80 °C Fluid: HFC-fluid |
| Rod material | Chrome-plated CK45 steel Hard chrome-plated stainless steel Hardened and tempered chrome-plated steel Nikrom steel Hardened chrome-plated steel |
| Rod end | Male thread Female thread Floating joint |
| CETOP PLATE | ISO 4401-03 NG6 ISO 4401-05 NG10 |
| Bushing drain | On demande |
Features and applications
The magnetostrictive transducer operates without physical contact, using a magnetic field to determine the piston position.Integrated CETOP plates allow direct mounting of ISO 4401 valves and servo valves on the cylinder, which reduces the oil volume between valve and actuator and facilitates closed-loop position control.
A removable steel cover protects the delicate external parts of the transducer from accidental impacts during transport, installation and operation.
Frequently Asked Questions
- How is the piston position detected in a Conforti hydraulic servo cylinder?
- What are the advantages of using a Conforti hydraulic servo cylinder with transducer?
- How can I select the most suitable Conforti hydraulic servo cylinder?
How is the piston position detected in a Conforti hydraulic servo cylinder?
Conforti hydraulic servo cylinders are equipped with a high-precision linear position transducer based on magnetostrictive technology. The magnetostrictive transducer operates without physical contact, using a magnetic field to determine the piston position. This technology eliminates mechanical wear and ensures long service life of the measuring system. The transducer provides an analogue output signal in current or voltage, or a digital signal in SSI, CANbus, DeviceNET, Profibus, EtherCAT®, EtherNet/IP™, PROFINET, or POWERLINK.
What are the advantages of using a Conforti hydraulic servo cylinder with transducer?
Conforti hydraulic servo cylinders are designed for applications that require high precision in position control. The transducer continuously provides an absolute position signal with no need for homing at power-up, whilst achieving extremely high resolution. A removable steel cover protects the delicate external parts of the transducer from accidental impacts during transport, installation and operation. Integrated CETOP plates allow direct mounting of ISO 4401 valves and servovalves on the cylinder, which reduces the oil volume between valve and actuator and facilitates closed-loop position control.
How can I select the most suitable Conforti hydraulic servo cylinder?
Our configurator helps you select and technically validate the most suitable Conforti hydraulic servo cylinder for your application. You can choose from ISO 6020/2 tie-rod servo cylinders, counterflange servo cylinders and ISO 6022 servo cylinders. The configurator guides you through cylinder sizing and selection from multiple options for features, materials, accessories and other specifications.